Appliance swap.
A new cooktop, oven or heater connected, pressure tested, commissioned and certified.
On the day
Connect · pressure test · commission · certify
Kingswood 2747 · Gas fitting
Smell gas? Step outside and ring 000
Gas fitter Kingswood, licensed and certified.
Need a gas fitter Kingswood locals can rely on? PVS Plumbing handles cooktop and oven connections, gas hot water swaps, heaters, BBQ points and leak repairs across Kingswood 2747, on natural gas or LPG. We work out of Penrith, so Kingswood sits inside our home zone, and every job finishes with a Gas Compliance Certificate.
§02 / Four jobs
What gas work do Kingswood homes need?
Most gas calls from Kingswood fall into one of four jobs. Tell us which one when you ring and we’ll know what to bring.
Gas hot water.
Like for like swaps or a move from storage to continuous flow. See our gas and electric hot water service.
Full range
Hot water service
New gas lines.
A BBQ point off the kitchen line, a run for a new appliance, or a renovation rough in.
Renovating?
Renovations
Leaks and faults.
A gas smell, a hissing fitting or a meter that keeps moving with everything off. We pressure test, find it, repair it and test again.
On the day
Pressure test · locate · repair · re-test
For the full breakdown of each job, see our main gas fitting service page.
Gas fitting service
§03 / Gas smell
What should I do if I smell gas?
Treat it as a leak until it is proven otherwise.
If you also have water coming through, our emergency and burst pipe page covers what to do next.
- Don’t light anything.Don’t light anything and don’t switch lights or appliances on or off.
- Get out.Open doors and windows on your way out if it is safe, then leave the house.
- Isolate the supply.If you can do it safely, turn the gas off at the meter, or close the valve on your LPG bottles.
- Make the calls.If the smell is strong, ring 000. Then ring us on 0412 045 854 to find and fix the leak.
§04 / How it runs
How a gas job runs with PVS.
1
Phone brief.
Tell us the appliance or job, whether you’re on natural gas or LPG, and send a photo of the existing connection if you can.
2
Quote.
We check the connection point and meter capacity, flag anything non compliant, and give you a written quote before work starts.
3
Install and test.
We isolate the supply, do the work, then pressure test to confirm there are no leaks.
4
Certify and hand over.
We commission the appliance, show you how to shut it off, and lodge your Gas Compliance Certificate.
Want to know what the certificate covers? Read gas compliance certificates in NSW.
§05 / Nearby suburbs
Gas fitting near Kingswood.
We do the same gas work in the suburbs around Kingswood. Not sure if we cover your street? Check the full list of areas we cover.
§06 / FAQs
Gas fitter Kingswood FAQs
Do you cover Kingswood for gas fitting?
Yes. Kingswood is in the Penrith LGA, which is our home zone. Ring 0412 045 854 and we’ll book you in.
Do I need a compliance certificate for a cooktop swap?
Yes. In NSW any gas appliance install or replacement needs a Gas Compliance Certificate from the licensed gas fitter who did the work. We lodge it as standard on every job.
Can you add a gas point for a BBQ or outdoor kitchen?
Yes. We extend the line from your existing supply, pressure test it and certify it. A photo of where you want the point helps us quote.
Do you work on LPG as well as natural gas?
Yes. Tell us which one you have when you call, because the fittings and the certificate are different for each.
§07 / Book now
Book a gas fitter in Kingswood.
Ring and tell us what you need. You’ll talk to a plumber, not a call centre, and we’ll book the visit on the call.